Humax CI-5100T - Manual (Page 24)

English
A/V Output Setting
Video Output (CVBS/S-Video/RGB)
Select one of the following options:
RGB - if you have connected a scart cable to a standard TV.
CVBS - if you have connected a scart cable to an old TV that
do not have RGB-input.
S-Video - if you have connected to the S-video (SVHS) input on
your TV or VCR.
Audio Output
Set the audio mode which is output from the TV SCART and
RCA/Cinch Jack. (Stereo/Mono)
Dolby Digital
lf Dolby Digital option is ON and the broadcaster provides the
Dolby Digital stream, the Dolby Digital audio language is firstly
selected when changing the service.
Screen Mode
Set the screen format of your TV (4:3 or 16:9).
4:3 - Standard TV
16:9 - Wide screen TV
Display Format
Select in witch format the picture should be dislayed on your TV.
If your TV screen format is 4:3 and you view a 16:9 transmission,
Letter-box - the whole picture in its original format will be dis-
played with a black filling on the top and bottom of
the TV-screen.
Center - the sides of the movie will be cut off and the central
part will be shown on the entire TV-screen.
Auto - your TV-set is in control of the picture display format.
If your TV screen format is 16:9 and you view a 4:3 transmission,
Pillar-box - the whole picture in its original format will be dis-
played with black bars filling out the TV-screen on
both sides of the picture.
Full - the picture is expanded so that it covers the whole
TV-screen. (Creates a slightly deformed appearance)
Auto - your TV-set is in control of the picture display format.
?
A/V Output Setting
Video Output RGB
Audio Output STEREO
Dolby Digital
OFF
Screen Mode 4:3
Display Format Letter-box
EN23