Safety – Humax CI-5100T User Manual
Page 3
This STB has been manufactured to satisfy the international safety standards.
Please read the following safety precautions carefully.
MAINS SUPPLY
: 190 - 250V AC 50/60Hz
OVERLOADING : Do not overload a wall outlet, extension cord or adapter as this may
result in fire electric shock.
LIQUIDS : The STB shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as base, shall be placed on the apparatus.
CLEANING
: Disconnect the STB from the wall outlet before cleaning. Use a light
damp cloth(no solvents) to dust the STB.
VENTILATION
: The slots on top of the STB must be left uncovered to allow proper air-
flow
to
the
unit.
Do not stand the STB on soft furnishings or carpets.
Do not expose the STB to direct sunlight or do not place it near a heater.
Do not stack electronic equipments on top of the STB.
ATTACHMENTS
: Do not use any unrecommended attachments as these may cause
hazard or damage the STB.
CONNECTION TO THE ANTENNA
: Disconnect the STB from the mains before connecting or disconnect-
ing the cable from the antenna.
FAILURE TO DO SO CAN DAMAGE THE ANTENNA.
CONNECTION TO THE TV
: Disconnect the STB from the mains before connecting or disconnect-
ing the cable from the antenna.
FAILURE TO DO SO CAN DAMAGE THE TV.
EARTHING
: The antenna cable MUST BE EARTHED to the system earth for the
antenna. The earthing system must comply with SABS 061.
LOCATION :
Place the STB indoor in order not to expose to lightening, rain or sunlight.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol indicates "dangerous
voltage" inside the product that
presents a risk of electric shock
or personal injury.
This symbol indicates
important instructions
accompanying the
product.
Va r n i n g !
Please do not insert metal or alien substance into the slots for the
Modules and Smart Cards. In doing so can cause damage to the STB
and reduce its life span.
Safety
EN2