Settings & functions, En30 – Humax CI-5100T User Manual
Page 31
Custom Search
The menu, “Custom Search” operates similar as the menu “Easy
Search”, however more parameters are required to search the ser-
vices. Select proper items as follows. To get proper information,
please contact your installer or the network operator.
Frequency
Select the proper item within “2K FFT”, “8K FFT” and “Auto” by using
the
buttons. If the information is not known, then “Auto” can be
selected. But this takes slightly longer time if “Auto” is selected
Mode
Select the proper item within “1/4”, “1/8”, “1/16”, “1/32” and “Auto” by
using the
buttons. If the information is not known, then “Auto”
can be selected. But this takes slightly longer time.
Guard Interval
Select the proper item within “1/4”, “1/8”, “1/16”, “1/32” and “Auto” by
using the
buttons. If the information is not known, then “Auto”
can be selected. But this takes slightly longer time.
Hierarchy
Select the proper item within “None”, “alpha=1”, “alpha=2”, “alpha=4”
and “auto” by using the
buttons. If the information is not know,
then “Auto” can be selected. But this takes longer time.
Constellation
Select the proper item within “QPSK”, “16-QAM”, “64-QAM” and
“Auto” by using the
buttons.
Stream
Select the proper item within “HP”, “LP” and “Auto”. This item is
deactivated when Hierarchy is “Auto” or “None”.
Code Rate
Select the proper item within “1/2”, “2/3”, “3/4”, “5/6”, “7/8” and “Auto”
by using the
buttons. “Auto” is recommended, if Hierarchy is
set as “Auto”.
Frequency Offset
Select the proper item within “No offset”, “+1/6 MHz”, “-1/6 MHz” and
“Auto” by using the
buttons. “Auto” is recommended.
Network Search
Select the option “YES” to search all services in the network.
Then, after STB succeeds to lock to the signal, STB will get
proper information on the services in the other UHF channels
and stores the information automatically. If the network operator
does not transmit proper information in the default channel, STB
can not search all services. It is required to search for all UHF
channels manually.
?
Service Searching
Easy Search
Custom Search
Automatic Search
Default Search
Settings & Functions
?
Custom Search
Frequency
818.0
Mode
8K FFT
Guard Interval AUTO
Hierarchy
NONE
Constellation 64-QAM
Stream
HP
Code Rate
3/4
Frequency Offset No Offset
Network Search No
0..9
EN30