Harmar Mobility LIFTS RPL400 - Manual (Page 20)

Operating the Lift
Step 1 - Up
Drive onto and stop in the middle of the
platform. Apply the brakes of your chair or
scooter.
Step 2
Verify that the emergency stop button is not
activated by giving it a quick pull out, away
from the side of the platform.
Step 3
Press and hold the UP rocker. The lift will
move in the up direction and stop when it
reaches the upper landing.
Warning: Always verify the lift’s
platform has stopped level with the
upper landing. If not contact your
Harmar Dealer for assistance.
Step 4
Release the brakes on your chair or scooter
and drive off the platform.
20