Heat & Glo Fireplace XLR-N-CE - Manual (Page 61)

61 Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev. L • 3/13
SLP-TRAP
Horizontal Termination Cap
38,4 cm
Note: Heat shields MUST overlap by a minimum of 3,8 cm. The heat shield is designed to be used on a
wall 10,2 cm to 18,4 cm thick. If wall thickness is less than 10,2 cm the existing heat shields must be
field tricmed. If wall thickness is greater than 18,4 cm a DVP-HSM-B will be required.
Heat
Shield
Term Cap
Minimum
Effective Length
Maximum
Effective Length
Trap1 7.9 cm 12,1 cm
Trap2 13,3 cm 23,5 cm
20,3 cm
30,5 cm
Max
Effective
Length
33,0 cm
38,1 cm
20,6 cm
27,6 cm
26,7 cm
3°
87°
Effective Length
14,6 to 21,3 cm
14,0 cm 21,3 cm
SLP-HRC-SS
SLP-HRC-ZC-SS
HORIZONTAL TERMINATION CAP
B. Vent Components Diagrams (continued)
Figure 17.5 SLP Series Vent Components