Harbor Freight Tools 65309 - Manual (Page 11)

SKU 65309 For technical questions, please call 1-800-444-3353. Page 11
cauTiOn: Do not attempt to start an auto-
mobile engine with this generator.
Voltage feedback from the running
automobile may damage the genera-
tor.
note: The DC terminal may be used while
the AC power is in use. An overload-
ed DC circuit will trip the DC circuit
protector (push button comes out).
If this happens, wait a few minutes
before pushing in the circuit protector
to resume operation.
Watch the Volt Meter to determine
11.
the current load on the generator.
If the Volt Meter reading falls below
110 V~ (or the voltage requirement
of attached devices), remove some
devices from the system to reduce
demand on the generator.
WaRninG! TO PRevenT SeRiOuS
injuRY FROM eLecTRic ShOcK:
use the GFci unit properly.
If the power supply to either duplex
outlet is interrupted, there may be a
short in the attached device’s wiring
that is tripping the GFCI unit. Check
all wiring connections carefully for
moisture and damaged insulation
before pressing the reset button.
if the GFci unit trips again
immediately or after a short while,
discontinue use immediately and
have the generator and the device
attached to that outlet serviced by
a qualified electrician.
Stopping the Generator
Turn OFF all attached devices. 1.
Unplug the cords from the Generator. 2.
Turn OFF the tractor engine. 3.