Servicing – Harbor Freight Tools 65309 User Manual

Page 12

Advertising
background image

SKU 65309

For technical questions, please call 1-800-444-3353.

Page 12

SeRvicinG

TO PRevenT

SeRiOuS injuRY

FROM accidenTaL

STaRTinG:

Turn the Power Switch of the

equipment to its “OFF”

position, wait for the engine to

cool, and disable the engine

before assembling or making

any adjustments to the

equipment

TO PRevenT

SeRiOuS injuRY

FROM equiPMenT FaiLuRe:

do not use damaged

equipment. if abnormal noise,

vibration, or excess heating

occurs, have the problem

corrected before further use.

Maintenance Procedures

Many maintenance procedures,

including those not detailed

in this manual, will need to

be performed by a qualified

technician for safety. if you

have any doubts about your

ability to safely service the

equipment, have a qualified

technician service the

equipment instead.

note: These procedures are in addition to

the regular checks and maintenance

explained as part of the regular op-

eration of the engine and equipment.
Perform regular visual inspection of

1.

the Generator and PTO shaft. Look

for loose or broken wires or defective

connections. Check for missing, cor-

roded or loose fasteners. Be sure all

shields and guards are in good condi-

tion. Inspect for general condition and

cleanliness.
Keep the generator clean and free of

2.

dirt, grease or debris. Clean it regu-

larly and whenever it becomes dirty.

Use a soft brush, damp soft cloth or

low pressure air to remove dirt and

debris.

cauTiOn: Do not use high pressure

water spray to clean the generator.

Injected water can damage the gen-

erator.
Protect the generator from high hu-

3.

midity and salt air environments.
Periodically clean the interior of the

4.

Generator Control Panel. Use com-

pressed air, a dry brush or electrical

contact cleaner to remove carbon

build up and metal corrosion.
When cleaning, check for loose wires

5.

or damage. Be sure printed circuit

boards are firmly plugged into their

sockets.

Gearbox Oil check

Check the oil level before each use

1.

and after each 10 hours of use. To

check oil level, be sure generator is

as level as possible.

Advertising