Wheel kit installation, 81 assembly – HONDA EU6500is User Manual
Page 83
81
ASSEMBLY
Wheel Kit Installation
TORQUE:
AXLE
WHEEL (2)
8
16 mm FLANGE BOLT (4)
8
16 mm
FLANGE BOLT (4)
STAND
20 mm WASHER
4.0
28 mm
COTTER PIN (2)
S
S
H
H
O
O
R
R
T
T
E
E
R
R
8 mm WASHER (4)
(t = 6 mm)
8 mm WASHER (4)
(t = 2.3 mm)
17
22 lbf·ft (24
29 N·m , 2.4
3.0 kgf·m)
Install the two wheels on the axle shaft using the washers and cotter
pins.
If the wheel kit is not installed, it may be possible for dirt and debris to
be drawn into the generator air intake causing possible generator
damage. Always operate the generator with the wheel kit installed.
Do not operate the generator without the wheel kit installed. The
wheel kit provides an air space between the ground and the generator
air intake.
Install the axle assembly on the generator using four 8 mm washers
and 8
16 mm flange bolts.
Install the two stands on the under frame using four 8 mm washers
and 8
16 mm flange bolts.
1.
2.
3.
06/09/12 12:30:28 31Z25600_082