HONDA EU6500is - Manual (Page 90)

88
OPTIONAL PARTS
CABLE TIE
REMOTE
CONTROL CABLE
REMOTE CONTROL BOX
GROMMET
PLUG
BATTERY MAINTENANCE
COVER
REMOTE CONTROL
CABLE
Plug the remote control cable into the 6-pin connector.
To avoid accidentally unplugging the remote control cable, secure
the cable to the generator frame with a cable tie as shown.
When the remote control is not
being used, replace the plug on the
connector.
Pass the remote control cable through the supplied wire grommet
and fit the grommet into the battery maintenance cover knockout.
Install the battery maintenance cover and tighten the cover screw.
Never operate the generator
without the battery maintenance
cover in place, as poor engine and
generator performance will result.
7.
4.
5.
6.
06/09/12 12:31:36 31Z25600_089