Harrison Labs MIXBUS V2.0.2 User Manual
Page 23
• Refresh: This will reload the list of plug-ins, if you've added or removed plug-ins from your system since the
dialog was first shown.
• Insert Plug-in(s): This will insert the list of plug-ins in the bottom pane to the mixer strip that launched the
Plug-in Manager Window
Sends
When a
new send
is create,
a window
for config-
uring the
Send will
immedi-
ately
appear.
By default,
Sends
have no outputs and must be configured as needed. Click "add" to add ports, and connect them to the destination
that should receive the output of the send (shown in the second picture, below)
• Add/Remove: adds/removes a Jack port to
the send.
• Disconnect All: disconnects all Jack ports
(does not remove ports)
• Available connections: This is a list of all
the available Jack connection ports, with one
tab for each Jack application, and one for the system sound I/O ("system").
1
12
2..0
0 R
Re
ed
diir
re
ec
ct
ts
s:: P
Pllu
ug
g--iin
ns
s,, S
Se
en
nd
ds
s &
& IIn
ns
se
er
rt
ts
s
23
Section 12.0 - Redirects: Plug-ins, Sends & Inserts
Mixbus User Guide
Note: The number of "ports" created will define the channels of the send. Sends can have 1 (mono), 2
(stereo) or more (multichannel) ports assigned.
%
Note: Sends are created "deactivated", you
must Activate the send before it will work.
%