Harrison Labs MIXBUS V2.0.2 - Manual (Page 42)

Custom Selection: You can also export the output from a single track (the "direct out" of the track/bus). The output
of the tracks should be assigned to one or both sides of the export file.
When “Custome Selection” is engaged, the right-hand side of the dialog will display a list of all available tracks and
buses. Stereo tracks and buses will appear as 2 separate items, with “out-1” indicating left, and “out-2” indicating
right. Place checkmarks to assign the track or bus output to the exported file’s channels.
IIf Mono is selected for the “Channels” option, then only a single checkbox is provided for each track/bus.
For a demo of exporting, watch this video on our YouTube Channel: http://www.youtube.com/watch?v=wddiGR-Y1bk
1 18 8..0 0 E Ex xp po or rt tiin ng g F Fiille es s
42
Note: Multiple tracks/buses may be assigned to a single channel of an export file. For example, you can
assign both the left and right channels of the Master Bus to a mono file. However please note that no level
compensation is provided. If the summed level of the tracks exceeds 0dBFS and the format is not 32-bit floating
poinnt, then the exported file can have “clipped” audio samples which may cause audible distortion.
%