Harrison Labs MIXBUS V2.0.2 - Manual (Page 53)

• Outbound MMC Device ID: Each MMC command includes a device ID. You can configure which Device ID
Ardour uses when it sends MMC commands. The default of 127 should be safe.
• Startup program change: On startup, Ardour sends a Program Change (PC) command. A PC command
includes a program number (a value between 0 and 127). You can choose which program number is sent by
Ardour. A value of -1 will send 127. The default is 127.
The PC command is sent on the MIDI port which is configured to handle MIDI parameter control. It is sent right after
you start a session (either a new one or an existing one). The command is also sent if you choose to load another
session without closing Mixbus.
• MIDI connections: Mixbus does not come with any way of establishing MIDI connections from/to other soft-
ware MIDI ports. On OSX/CoreMIDI you need to connect the MIDI ports with a patchbay tool such as the excel-
lent MIDI Patchbay from Pete Yandell . On Linux, qjackctl (the same program that is recommended for control-
ling JACK) also includes an excellent MIDI connection manager. You could also use command line tools such as
aconnect.
2 26 6..0 0 P Pr re effe er re en nc ce es s W Wiin nd do ow w
53 Section 25.0 - Preferences Mixbus User Guide