Haan Sanitizing Steam Cleaner HS-20 - Manual (Page 15)

www.haanusa.com 877-HAAN DIRECT / 877-422-6347 pg 15
PROBLEM: Steam is emitted when refilling the water tank.
Possible Cause:
1) The internal tank is too hot.
Possible Solution:
1) Wait until the unit has completely cooled.
2) Pour the water in slowly.
3) Use the funnel when refilling with water.
PROBLEM: An accessory is loose.
Possible Cause:
1) Accessory is not properly attached and
connection is not tight.
Possible Solution:
1) Reattach the accessory and make sure it is
tight and properly attached. Refer to the
instructions for accessory attachment
described starting on page 6.
QUESTION: Can the HAAN Steam Cleaner be used on
laminate flooring?
Your Steam Cleaner is designed to clean hard surfaces like
laminates, and upholstery that will withstand high heat. It
emits steam at 212˚F with a fine vapor-like steam that is
gentler than those that simply blast water and steam onto
the surface. The HANN is more effective at penetrating
stains and killing harmful germs and bacteria than competitors.
Steam is all we do, and we’ve spent years perfecting it.
DO NOT use on soft plastic and cold glass. On surfaces
that have been treated with wax, or on some no-wax floors,
the sheen may be removed by the heat and steam action.
DO NOT use on unsealed wood. This could cause the wood
panel to rise. It is recommended that an isolated surface
area be tested to verify suitability before proceeding to
the rest of the area.
?