Haan Sanitizing Steam Cleaner HS-20 - Manual (Page 8)

Using Your Steam Cleaner
pg 6 877-HAAN DIRECT / 877-422-6347 www.haanusa.com
When using this product, first perform steps 1-7 with the
power cord unplugged. If using for the first time, fill with
and discard water once. An odor may be emitted when first
used.
Filling the Water Tank:
1) Press down firmly on the safety cap until you
hear a clicking sound; immediately turn it
counter-clockwise to remove cap. (Fig 1) Be sure
that the ‘Continuous Steam Lock’ is in the unlock
position. (Fig 2)
NOTE: After each use, completely empty any
remaining water from the internal tank. Water
can be drained by turning the product upsidedown.
2) Fill the measuring cup with water. Optimum
capacity: 200ml. Use the funnel to fill the internal
tank with water. Use only one measuring cup of
water per single use. Be careful not to overflow
the container. (Fig 3)
3) Turn the safety cap clockwise to close. The cap
will continue to turn even when closed properly.
During product operation, the safety cap does
not open due to the internal pressure. It can be
opened only when the internal pressure of the
product and/or the water temperature is low.
Attaching the Accessories:
Concentrator Nozzle, Extension Hose or
Garment/Surface Attachment:
4) When attaching the Concentrator Nozzle, Extension
Hose or Garment/Surface Attachment, align the
indicator line (—) on the connection section of
the accessory with the indicator line (—) on the
main unit. (Fig 4) Push the accessory onto the
steam nozzle of the main unit and turn in a
Operating Instructions:
Fig 1a
Fig 2
Fig 3
Fig 4
!
i
CaUtiOn
After each use, unplug
the power cord and press
the steam button to fully
discharge all remaining air.
Make sure that no steam
remains before opening the
safety cap.
Fig 5
Fig 5a