Heath Zenith Chime Extender 6157 - Manual (Page 4)

-4- 598-1070-04
Double-Sided Tape
Figure 6
• Tape Mounting: When attaching chime extender using double sided tape,
make sure the surface of the wall is clean.
– Install battery cover.
– Peel the protective backing from one side of two pieces of the double-
sided tape and apply the tape to the areas on the back of the chime
extender as shown in Figure 6.
– Remove the remaining protective backing and carefully stick the chime
extender in the desired location.
5. Adjust volume control (Available on selected chimes). Unplug chime and
adjust volume control to desired volume (see Figure 1). Plug chime back into
wall outlet.
Double-Sided Tape