Horizon Fitness CLUB SERIES CST4.6 - Manual (Page 11)

11
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
A. Open HARDWARE BAG 4
B . With running deck in lowered position,
place CONSOLE on upright masts.
C. Secure console by partially inserting
3 BOLTS (D) and 3 FLAT WASHERS
(E) into side of LEFT upright MAST.
Remember to partially install
these bolts.
D . Gently lift right side of the CONSOLE
to connect the CONSOLE CABLE.
Carefully tuck wires in mast to avoid
damage. NOTE: Do not pinch console
cable. Be sure the console cable
prongs are aligned and the ends are
tightly seated into each other.
E
. Repeat step C above to assemble the
right side upright mast and console.
F. Tighten all bolts completely.*
G. Once BOLTS (D) have been
completely tightened, insert BOLTS
(F) into the back of the mast and
completely tighten.
BOLT (D)
15 mm
Qty: 6
FLAT WASHER (E)
8 mm
Qty: 6
top view
BOLT (F)
25 mm
Qty: 2
top view
* NOTE: Be careful not to pinch any
wires while assembling the masts.
* Be sure to tighten bolts after all are lined up.
Z01
BOLT (D)
MAST
FLAT WASHER (E)
BOLT (F)
ASSEMBLED IN STEP 4-C
HARDWARE BAG 4 CONTENTS :
ASSEMBLY STEP 4