haier N60 - Manual (Page 16)

Call
2.1 Dial call
When your service provider’s icon display
the screen, to wit enter idle mode and you
can make or answer a call. The signal
indicator in the top left corners of the screen
Indicates strength of signal being received.
There are 4 bars is the most signal indicator.
All mobile phones may be obstruction
subject to interference, which could affect
the performance of the mobile phone. So
moving within small range can advance the
signal strength.
Make a call in idle mode have dual mode as
direct dialing and call from the phonebook.
2.1.1 Direct dialing
2.1.1.1Dialing domestic telephone
The best simple means is enter phone
number (make a domestic telephone, enter
area code) then press call key (or use
touch-up to click the call key button) to make
a call. The display screen appears ‘linking’
during dial a number, when calling there is
called time and caller’s phone number and
name will appear on this screen.
Pressing right key, power/hang up (or click
‘hang-up’ button by touch-pen) to end a call.
The screen will show how much time you
have spent on a last call.
2.1.1.2 Dial extensions of fixed telephone
Some extensions of fixed telephone cannot
be got through directly. So you need to get
through the leader and then the extension
number, if you insert ‘w’ ‘p’ between two
numbers while inputting them the handset
will finish dialing the leader and
automatically dialing the extension number.
The method of inputting ‘w’ ‘p’ is as follows:
input the call time and press # key (‘w’ will
be displayed on the screen at this moment).
Then press long #(‘p’ will be displayed on
the screen).
You can dial main and extension number
directly by input ‘w’. Feature of ‘w’ is
shortening processing of call. Once input
‘number’ + ’w’ (delay time) + ‘operating