haier N60 - Manual (Page 50)

you identify the account is deleted.
2.3.3
Setting the default account
You can press setting default key in the
menu and choose an account on the
account list. Then the account is set as
default setting.
2.3.4
Modifying the account
If you want to enter the editing modifying
window, you can choose an account on the
list, then press the OK (or use the touching
pen to touch the account)
2.3.5 The
regulations of the mails
1. Entering the setting window by using
the setting key in the menu of the soft key,
you can press the rule key to the rule list.
2.there are two default setting rules in the
list. You can create the new one by pressing
the new creation key in the menu of the soft
key.
3.
After choosing the appropriate
conditions and the operations of rules.
You can input the rule name and set up
a new rule.
2.3.6 Writing and sending mails
1. You can enter the writing window by
selecting the writing e-mail in the menu
of the soft key. You can also use the
touching pen to touch the writing key to
enter it.
2. After inputting the address of the
receiver, subject and the content, you
can send the e-mail. It is not necessary
to input the subject and the content, but
you must input the receiver’s address.
3. Selecting the receiver key on the new
e-mail writing window, the address is
activated to select the receiver.
4. selecting save in the menu of the soft
key , the writing e-mail can be stored.
5. entering the additive list after selecting
additive in the menu, you can press the
additive key to choose which you want.
Then the additive is appended by
selecting the identification.
2.3.7 receiving the mail
1. choosing the default setting account in