haier N60 - Manual (Page 85)

touching pen to see the previous (next)
word’s translation. Press CLR key (or click
‘back’ key with the touching pen) to delete
the input words or characters.
3. Press the right soft key (or click ‘quit’ with
the touching pen) to quit the dictionary.
4.8 Data synchronization
Through this function, the synchronization
between the data in the Microsoft Outlook
2000 in PC and the data in the phonebook of
the mobile can be achieved.
4.8.1 Preparation for synchronization
1. The Windows 2000 and XP system are
required. Also, the Outlook 2000 of Microsoft
Office and the mFone Sync program of the
CD-ROM of the phone should be setup.
2. Connect the mobile and the PC
appropriately with USB wire.
4.8.2 Synchronization process
The dialogue frame ‘for the USB drive?’ will
be opened after the USB wire is connected
to the mobile. Choose ‘no’ to enter the
mobile data synchronization window and then press the left soft key (or click ‘start’ at
the soft key tip zone). After the initialization
of the mobile, open the mFone Sync
program installed in the PC and press start.
There will be a progress span under the
synchronization span. After the
synchronization, restart the mobile to finish
the data synchronization.
Notice: 1. To ensure the correctness, please
ensure that the time in PC is in coincidence
with the time of the mobile.
2. If unexpected situations occur during the
synchronization, please turn off the mFone
Sync program, quit the data synchronization
of the mobile and then restart the process
mentioned above.
4.9 Service telephone
‘Service telephone’ provides you with all the
domestic service center phone number of
Qingdao Hai’er Communication Ltd all over
China. You can dial the numbers searching
for help.