Harbor Freight Tools CENTRAL MACHINERY 98524 - Manual (Page 15)

SKU 98524 For technical questions, please call 1-800-444-3353. Page 15
Troubleshooting
Problem Possible Causes Likely Solutions
Motor overheats Motor overloaded. 1.
Motor not cooling right. 2.
Reduce depth of cut 1.
Clean sawdust from Planer. 2.
Circuit breaker or
fuse keeps tripping
Motor overloaded. 1.
Wrong circuit breaker or fuse. 2.
Dull blades. 3.
Reduce depth of cut. 1.
Use correct circuit breaker or fuse. 2.
Replace blades. 3.
Follow all safety precautions whenever diagnosing or servicing the
tool. Disconnect power supply before service.
PLEASE READ THE FOLLOWINg CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT
HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/
OR DISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN By CERTIFIED AND LICENSED TECHNICIANS, AND NOT By THE BUyER. THE
BUyER ASSUMES ALL RISK AND LIABILITy ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.