Harbor Freight Tools CENTRAL MACHINERY 98524 - Manual (Page 5)

SKU 98524 For technical questions, please call 1-800-444-3353. Page 5
Never leave the Planer unattended 6.
while running. Turn power off if you
have to leave the Planer.
Turn off Planer when jammed.
7.
Before each use, check all nuts, 8.
bolts, and screws for tightness.
Keep extension cord off the
9.
ground and away from water.
Install this product on a proper
10.
surface. Locate on a flat, level, and
solid surface that is capable of sup-
porting the weight of the Planer and
the stock being planed.
maintain labels and nameplates
11.
on the tool. These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
This product is not a toy.
12. Keep it
out of reach of children.
People with pacemakers should
13.
consult their physician(s) before
use. Electromagnetic fields in close
proximity to heart pacemaker could
cause pacemaker interference or
pacemaker failure. In addition, peo-
ple with pacemakers should:
• Avoid operating alone.
• Do not use with power switch locked
on.
• Properly maintain and inspect to
avoid electrical shock.
• Any power cord must be properly
grounded. Ground Fault Circuit Inter-
rupter (GFCI) should also be imple-
mented – it prevents sustained elec-
trical shock.
Some dust created by power sand-
14.
ing, sawing, grinding, drilling,
and other construction activities,
contains chemicals known [to the
State of California] to cause can-
cer, birth defects or other repro-
ductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and ce-
ment or other masonry products
• Arsenic and chromium from chemi-
cally treated lumber
Your risk from these exposures var-
ies, depending on how often you do
this type of work. To reduce your
exposure to these chemicals: work in
a well ventilated area, and work with
approved safety equipment, such as
those dust masks that are specially
designed to filter out microscopic
particles. (California Health & Safety
Code § 25249.5, et seq.)
The warnings, precautions, and
15.
instructions discussed in this in-
struction manual cannot cover all
possible conditions and situations
that may occur. It must be under-
stood by the operator that common
sense and caution are factors which
cannot be built into this product, but
must be supplied by the operator.
SAVE THESE
INSTRUCTIONS.