Access the embedded web server, Use the embedded web server setup wizard – HP 2570 User Manual

Page 39

Advertising
background image

Note

Only use the Embedded Web Server to change network settings if you

cannot access the HP All-in-One control panel, or you need to change an
advanced option not available on the control panel.

Access the Embedded Web Server
You can only access the Embedded Web Server on a computer connected to an
HP All-in-One on a network.
1.

Press

Setup

.

2.

Press until

Network

is highlighted, then press

OK

.

The

Network Menu

appears.

3.

Press

OK

, then press

OK

again.

This selects the

View Network Settings

menu and then prints a configuration

page for your HP All-in-One, including the IP address. You will use the IP address
in the next step.

4.

In the

Address

box in your Web browser on your computer, type the IP address

of the HP All-in-One, as shown on the network configuration page. For example,
http://192.168.1.101.
The Embedded Web Server

Home

page appears, showing information for the

HP All-in-One.

Note

If you are using a proxy server in your browser, you might need to

disable it to access the Embedded Web Server.

5.

If you need to change the language displayed in the Embedded Web Server, do
the following:
a.

Click the

Settings

tab.

b.

Click

Select Language

in the

Settings

navigation menu.

c.

In the

Select Language

list, click the appropriate language.

d.

Click

Apply

.

6.

Click the

Home

tab to access device and network information, or click the

Networking

tab to access more network information or to modify network

information.

7.

Make any configuration changes.
For more information see

Use the Embedded Web Server setup wizard

.

8.

Close the Embedded Web Server.

Use the Embedded Web Server setup wizard
The network setup wizard provided in the Embedded Web Server gives you an
intuitive interface to your network connection parameters. For more information on
how to open the Embedded Web Server, see

Access the Embedded Web Server

.

1.

Click the

Networking

tab.

2.

Click

Wired (802.3)

in the

Connections

navigation menu.

3.

Click

Start Wizard

, and then follow all of the wizard instructions.

Chapter 4

36

HP Photosmart 2570 All-in-One series

Netw

ork

setup

Advertising
This manual is related to the following products: