Hauppauge WinTV USB User Manual
Page 11
N
ote: Be sure to use the exact version of Windows 98 CD-
ROM that is installed on your system. If you are using
Windows98 SE, do not use a Windows98 Gold CD-ROM.
Also if Plug-n-Play does not correctly load the driver, you may
manually load the driver from the WinTV-USB CD-Rom. Open the
USB folder and double click the file “USB98.exe” to manually
install the driver. Once the driver is finished, you must manually
run the SETUP.EXE on the WinTV-USB root directory to install
the WinTV viewing application.
Connecting the WinTV-USB to a VCR, Video
Camera or Camcorder
Most VCR’s or camcorders have a female RCA jack labeled “Video Out”. Most
also have a jack labeled “Audio Out”. Most video cameras simply have one out-
put connection labeled "Video Out".
To connect the video to the W
Wiin
nT
TV
V--U
US
SB
B
, use shielded video cables (not supplied)
with male RCA connectors on both ends:
-
connect from the “Video Out” jack on your video camera, VCR or cam-
corder to the Composite Video input jack on the WinTV-USB.
N
ote: USB has a high quality S-Video input jack, which
requires an S-Video to Composite video Adapter (supplied)
to connect to your Camcorder or VCR.
1-4
WinTV-USB
Installation and Reference Manual