Hauppauge WinTV USB - Manual (Page 18)

To reduce the effects of motion in the video image, but with lower image resolu-
tion, in the Fields Captured option choose 1 (Motion).
Motion Video Capture mode
You can switch the WinTV-32 application into the motion video capture mode by
clicking on the Motion Video Capture Mode button on the toolbar (see
page 2-2 for its location).
In WinTV-32, to configure motion image capture, click the 422/YUV (configura-
tion) button.
In WinTV-2000, to configure motion image capture, first open the software
remote control (click the RC button in the lower right hand corner of WinTV-
2000). Then click the Advanced Controls button (to roll down the
advanced controls), and then click the FMT button.
WinTV-USB
Installation and Reference Manual
2-5