Hauppauge WinTV USB - Manual (Page 16)

If you are using a cable TV connection, in the Broadcast/Cable menu item,
select Cable.
In Video Format, in North America choose NTSC M. In South
America, choose PAL M or PAL N.
After the scan is complete, you will have a list of TV channels which are active in
your area.
You can modify the channel names by single clicking on the chan-
nel, then clicking Edit. Change the channel name to the name that you would
like to have displayed in the WinTV toolbar.
To set up a External video source, go into Channel configuration (click on
Suite on the WinTV2000 or click Configure/Channels on WinTV-32),
and click on INPUT Sources. Highlight COMPOSITE and click ADD. Pick
your video format and give it a name, then click ADD. Now you have a external
video channel.
WinTV-USB
Installation and Reference Manual
2-3