Honeywell GC-715P24 - Manual (Page 10)

◆ SENS( Sensitivity Up mode ) Mode
If the sensitivity ON mode is selected and in low light conditions, the camera
sensitivity is increased by getting picture from the memory.
Maximum sensitivity is selectable out of 9 steps . ( Refer to Fig5 )
Fig 5. Maximum sensitivity setting table
Mode Remark Setting Fields/sec
0
X2 30 1
15 2
3
4
5
6
7
8
9
Default
0 1
2
3
4
5 6
7
8
9 0
“7” FIELD switch
X4
X6
X8
X10
X16
X32
X64
X128
10
7.5
6
3.8
1.9
0.9
0.5
☞ In the sensitivity ON mode , sensitivity is automatically controlled within maximum
sensitivity setting value.
☞ It is impossible to use BMB and SENS functions simultaneously !!!
To use BMB or SENS, select “BMB/SENS” switch one of two,
To use neither BMB nor SENS, select “BMB” and level “H1,H0” to OFF.
or select “SENS” and set the Rotary switch “7” to “0”.
BMB
SENS
15 15
16 16
OFF 60