Honeywell GC-715P24 - Manual (Page 8)

◆ in case of using AUTO iris lens
-. Set “EE/VSD” switch on Side
to “VSD”.
-. Set “EE/VSD” switch on Rear
to “VSD”.
② “EE/VSD” Mode ( Lens type selection )
If using a manual lens,
the “EE/VSD” switch has to be set
to “EE”. If using a lens with automatic
iris, the “EE/VSD” switch has to be set
to “VSD”
③ “DC/VSD(AUTO)” Mode ( Auto Iris Lens type selection )
Auto Iris Lens are DC Type or VSD Type.
DC
VSD
EE
VSD
◆ in case of using DC iris lens.
-. “EE/VSD” switch on side to “VSD”,
“EE/VSD” switch on rear to “DC”.
-. Slowly turn “8” LEVEL on Rear until
the monitor picture appears to be not
too bright or too dark.
11 11
12 12
EE
VSD(Auto)
DC EE
Auto