Hughes & Kettner ATTAX 100 - Manual (Page 12)

12
ATTAX-MANUAL
7. TECHNICAL DATA
PREAMP SECTION: CLEAN, CRUNCH + LEAD tube channels
LOW INPUT: -10 dBV/ 1 M ohms
HIGH INPUT: -20 dBV/ 1 M ohms
FX-RETURN: -10dBV/ 0dBV/ 47 k ohms
FX-SEND: 0 dBV/ -10dBV/ 1 k ohms
REC.OUT: -3 dBV/ 800 ohms
POWERAMP SECTION: 'CURRENT FEEDBACK' solid state power amp
Output Power: 90 W rms into 8 ohms
120 W rms into 4 ohms
PHONES: 0,5 W, 600 ohms
Freqency response: 20 Hz - 50 kHz (into 4 ohms)
Speakers: CELESTION RockDriver Vintage, 12“, 8 ohms
GENERAL FEATURES:
Voltage: 230 V~ (European model)
117 V~ (North American model)
100 V~ (Japanese model)
Max. power consumption: 200 VA (into 4 ohms)
Mains Fuse: slo-blo 1000 mA (230 V model)
slo-blo 2000 mA (117 V model)
slo-blo 2500 mA (100 V model)
Secondary Fuses: 2 x slo-blo 2500 mA (power amp)
slo-blo 500 mA (tube)
Dimensions: combo: 560 x 500 x 285 mm (W x H x D)
approx. 22 x 19,5 x 11,25“
head: 690 x 270 x 270 mm (W x H x D)
approx. 27 x 10,5 x 10,6“
Weight: combo approx. 40 Lbs./ 18 kg, head approx. 35 Lbs./ 16 kg