HANNspree M19N2 - Manual (Page 15)

14
OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control
buttons are located at front panel of the monitor (See Figure 3). By changing
these settings, the picture can be adjusted to your personal preferences.
• The power cord should be connected.
• Connect the Signal cable from the monitor to the computer.
• Press the power button to turn on the monitor. The LED will turn
green.
EXTERNAL CONTROLS:
1 MENU 2 VOL + X
3 POWER 4 W VOL -
5 AUTO 6 Power Indicator (LED)
5 4 3
6 2 1
Figure 3. External Control Buttons