HANNspree M19N2 User Manual
Page 7
6
•
Never push any object into the slot on the monitor cabinet. It could short
circuit parts causing a fire or electric shock. Never spill liquids on the
monitor.
•
Do not attempt to service the monitor by yourself; opening or removing
covers can expose you to dangerous voltages and other hazards. Please
refer all service issues to qualified service personnel.
•
To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked between
100 - 240V AC, Min. 5A.
•
The wall socket shall be installed near the equipment and shall be easily
accessible.
• Do not install the monitor in a location near heat sources such as
radiators or air dusts, or in a place subject to direct sunlight, or
excessive dust or mechanical vibration or shock.
• Save the original carton and packing materials, as they will come in
handy if you ever have to ship your monitor.
• To ensure problem-free shipping, pack your monitor in the same
packing materials and carton as it was shipped from the factory.
• To keep the monitor looking new, periodically clean it with a soft
cloth. Stubborn stains may be removed with a cloth lightly dampened
with a mild detergent solution. Never use strong solvents such as
paint thinners, benzene, or abrasive cleaning products. These and
other harsh cleaning agents will damage the cabinet of the monitor.
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitor and do not indicate a
problem.
•
Due to the nature of the fluorescent light, the screen may flicker during initial
use. Turn off the Power Switch and then turn it on again to make sure the
flicker disappears.
•
You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
•
The LCD screen has effective pixels of 99.99% or more. It may include
blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the
time.