HANNspree M19N2 - Manual (Page 24)

23
Near Timing Mode:
Select the “Near Timing Mode” option to
enable or disable this function. Press
MENU key to select On or Off.
DOS mode:
Select the “DOS mode” option to set the
monitor for use with PC. Press MENU
key and select 720 x 400 or 640 x 400.
Recall the factory settings:
Select the “Factory Preset” option to
reset to the monitor’s default setting.
This will erase the current settings.
Press MENU key and select On or Off.
Input Setting:
Select the “Input Setting” option to
change between the analog (D-SUB) or
Digital (DVI/HDMI) source. Press MENU
key and select Analog or Digital input.
Near Timing Mode
On Off
DOS OSD ? A
B
Other Setting
DOS Mode
720X400 640X400
DOS OSD ? A
B
Other Setting
Factory Preset
On Off
DOS OSD ? A
B
Other Setting
Main Menu
OSD ETC
80. 0KHz / 75. 0Hz
1280x1024
D-SUB HDMI DVI-D
Input Setting