Hitachi SBW100 - Manual (Page 9)

Controls and Functions
Remote Control
9
PAIR Indicator
This indicator flashes during the pairing process between the
Soundbar and Subwoofer. After the link between the Soundbar
and Subwoofer is established, this indicator will turn off.
POWER Button
Plug the power cord into the AC outlet. The Soundbar goes to
the standby mode.
Press this button to turn the Soundbar on. The POWER
indicator will illuminate to indicate the Soundbar is on. The
Soundbar will remain on as long as an input signal is active. If
the input becomes inactive the Soundbar will change to standby
mode to conserve power.
To completely turn off the Soundbar, press this button again.
SURROUND Button
This button is used to select either the FX SURROUND mode
or the STEREO mode.
MUTE Button
Press this button when you want to activate the audio mute.
Press it again to deactivate the mute function. Pressing the
VOLUME buttons will also deactivate the mute function.
MAIN VOLUME Buttons
Press the + or - button to adjust the main volume up or
down respectively.
SUBWOOFER VOLUME Buttons
Press the + or - button to adjust the Subwoofer volume
up or down respectively.
The Subwoofer volume sets the balance of the Subwoofer with
the Soundbar. So the output level of the Subwoofer is adjusted
by both the main volume and the Subwoofer volume.
INPUT SELECTOR Button
Press this button to select INPUT 1, INPUT 2, or INPUT 3.
PAIRING Button
This is used to recover the wireless connection between the
Soundbar and the Subwoofer. Press and hold this button at
least 3 seconds until the PAIR indicator on the front panel
starts flashing. Then press the PAIRING button on the rear
panel of the Subwoofer. The two units should link back up.
INPUT 3
Connection type - 3.5 mm mini stereo. If your TV has a
headphone output, this is a primary input to use by using
the supplied 3.5 mm mini stereo cable.
INPUT 2
Connection Type - RCA. Use this input to connect with your
external devices (Blu-ray Players, DVD Players, CD Players,
MP3 Players, or Home Video Game Systems).
INPUT 1
Connection Type - RCA. If your TV does not have a
headphone output, use this input to connect with the
set-top-box by using the supplied RCA cable.
PAIR Indicator
Upon confirming the PAIR indicator on the front panel of the
Soundbar flashes, press the PAIRING button on this panel. It
will turn on when the wireless connection is recovered.
PAIRING Button
This is used to recover the wireless connection between
the Soundbar and the Subwoofer. Upon confirming the PAIR
indicator on the front panel of the Soundbar flashes, Press
this button. The two units should link back up.
MUTE Button
Press this button when you want
to activate the audio mute. Press it
again to deactivate the mute
function.
INPUT SELECTOR Button
Press this button to select
INPUT 1, INPUT 2, or INPUT 3.
POWER Button
Press this button to turn the
Soundbar on or off.
SURROUND Button
This button is used to select either
the FX SURROUND mode or the
STEREO mode.
MAIN VOLUME Buttons
Press the + or - button to adjust
the main volume up or down
respectively.
SUBWOOFER VOLUME Buttons
Press the + or - button to adjust
the Subwoofer volume up or down
respectively.
7
8
9
10
11
12
13
14
15
17
16
18
19