Honeywell 800-04433V1 - Manual (Page 11)

iPGSM-COM Commercial Fire Communicator – Installation and Setup Guide
– 9 –
PowerBoost1 Module Information
LED Indicator STATUS
AC
(green) AC power available.
ACTIVE
(green) Cyclical flashing – normal communications.
Repetition of 3 flashes – loss of communications.
LOW BATT (yellow) Missing or low battery.
TROUBLE (yellow) One or more trouble conditions exist, such as; overload, output supervision,
ground fault, or charger failure.
Notes:
 If AC power is lost and the battery voltage falls below 10v, the module's output voltage will be
turned off. The output power is turned back on when AC power is restored.
 You must use the DIP switch settings shown below.
iPGSM-COM-003-V0
TROUBLE LED
INDICATOR
PowerBoost 1
1 5
ON
2 3 4
Confiure DIP switch
as shown:
AC LED
INDICATOR
ACTIVE LED
INDICATOR
LOW BATT LED
INDICATOR
1 5
ON
2 3 4
(Switch handle = white)