HP 5300 - Manual (Page 24)

Installation Overview
2-2 HP Smart Array 5300 Controller User Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: c-ch2 installation overview
Codename: SilverHammer Part Number: 135606-005 Last Saved On: 10/8/02 11:10 AM
Procedure for a Pre-configured System
1 Back up data (required if migrating
from a non-array controller).
- - - - -
2 Update the system firmware
(Chapter 4).
:
3 If the controller is to be the boot
device, install the device driver for
your operating system (Chapter 8).
Otherwise, continue with step 4.
:
5 Set the controller order (Chapter 6).
- - - - -
4 Install the controller hardware
(Chapter 3).
:
6 Update the controller firmware
(Chapter 5).
:
7 If using the System Configuration
Utility, update the system partition
(Chapter 5), and then check the
controller order (Chapter 6).
- - - - -
8 If the controller is not to be the boot
device, install the device driver for
your operating system (Chapter 8).
:
9 Update Insight Manager Agents if
new versions are available (Chapter
8).
:
11 If migrating from a non-array
controller, restore data from backup.
- - - - -
10 Create and format logical drives as
desired (Chapter 7).
Figure 2-2: Controller installation in an already
configured system