Harman Stove Company R6 - Manual (Page 3)

3
Packing List
Assembly and Installation
Final Assembly
Remove parts from ash pan.
Install Wooden Door Handle with
1/4 x 20 x 2 1/2 bolt.
Install Brass Hopper Knob with
10-32 x 1/2 bolt.
Install the two Firebricks on the
angle iron behind the burn pot as
shown in fig. 1.
Remove tape from Flame Guide
and make sure it is resting on the burn
pot as shown in fig. 1.
Put the ash pan back in the stove.
Inside Stove:
Hardware Pack
(2) Electrical Terminals
(1) 10-32 x 1/2" Bolt
(1) 1/4 x 20 x 2 1/2" Bolt
(1) Wooden Handle
(1) Brass Knob
(1) Owners Manual
(1) Warranty Activation Coupon
(1) Room Sensing Probe
(1) Ash Pan
(2) Firebricks
(1) Scraper
(1) Flame Guide
(1) Cleaning Brush
Firebricks
Flame Guide
Hopper Knob
Ash Pan Handle
Fig. 1