Harmar Mobility AL500 - Manual (Page 23)

OPERATION
Drive the Chair onto the platform taking care
to stop when the drive wheels fall between the
bars in the platform. 2
AL 560
LOADING A POWER CHAIR
ON
DOWN
UP
1 Insert Key and switch to "ON" position
Press down on Toggle switch and the
platform will unfold. Continue to lower
until platform reaches the ground and
becomes level.
ON
DOWN
UP
3 Rotate the Chair’s Inner Arm Rest upwards
and out of the way of Hold Down Arm.
4 Pull the RED “T” Handle
while rotating the Hold Down Arm. Release
“T” Handle to allow arm to lock in position.
5 Press “UP” on toggle to raise Platform until ratchet
sound is heard. Hold Down Arm will squish seat,
and lock Power Chair in place. If desired, rotate
arm rest back to original location.
ON
DOWN
UP
Turn “OFF” and remove
Key if desired
Your Power Chair is now
ready for transport.
To remove the chair and prepare
the lift for unloaded travel, follow
above steps in reverse, and reverse
direction of the arrows.
23