Harmar Mobility AL500 - Manual (Page 5)

AL123
Standard Class 3
AL125
Class 3 Extra long
H124
Class 3 Short
AL1232
2in Drop Class 3
AL1236
6in Drop Class 3
H128
Class 2 Short
AL1235
5in Drop Class 3
AL1265
4in Drop Class 2
AL127
Class 2 Extra long
AL126
Standard Class 2
A Hitch Adapter is the part of the lift
that plugs into a vehicle's trailer hitch.
Several hitch adapters are available
to fit the needs of differnet vehicles.
When selcting a Hitch Adapter you
should determine the hitch class and
measure the bumper distance.
Bumper distance is the length from the
trailer hitch's bolt hole to the rear most
point on the vehicle.
Hitch class is usually printed on the trailer hitch,
however it can also be determined by measuring
the inside of the receiver on the trailer hitch.
Class 2 hitches measure 1-1/4" x 1-1/4"
Class 3 hitches measure 2" x 2"
Once you have determined the hitch class
and bumper distance, refer to the diagram
below to select the proper hitch adapter.
As always, Harmar Mobility's trained personnel
will be glad to assist you in selecting the
proper hitch adapter.
Shorter adapters available for
shallow hitches.
Drop adapters available for higher
than normal vehicles.
Hitch Adapters
Hitch Class Bumper Distance Bumper Distance Bumper Distance
Class II 0”-7.5” 7.5”-10” 10”-13.5”
AL126 AL127
Class III AL123 AL125 AL125
VEHICLE HITCH
5