Hasselblad 645 - Manual (Page 135)

Transmitting Data
135 Contents Back Next Index
Serial Out Mode
When the serial port is in Serial Out mode, your
DCS 645 sends data to a remotely connected
device.
☛ Serial In and Serial Out modes can work at
the same time.
1 Select Serial Out from the Serial Port menu
2 Select your choice from the Serial Out Mode
menu (described in the table below).
The setting is retained until you change it.
Menu Choice Action
None No data transmitted.
Image Number A text string containing
the image number of
the just-captured
image is sent to the
connected device.