Hasselblad 645 - Manual (Page 22)

Capture Workflows
22 Contents Back Next Index
Capturing Images
Using the DCS 645
✔ Select the desired folder to store captured
images.
✔ Enable processing if you want images
processed to ERI JPEG or TIFF RGB on-
camera
(page 102) . Change processing
settings (page 104) , if needed. (It is
recommended that you save the original
.DCR files. Consider the .DCR file as your
“digital negative.”)
Occasional Verification
Conditions such as lighting and composition vary
between locations (for example, between the
bride’s home, the church, and the reception site).
To assure the highest image quality, evaluate
test images
(page 21) at each location and make
necessary adjustments.
You may also want your customer to review
images while still on location.
View images using one of the following:
✔ Image LCD using one of several Display
modes
(page 108)
✔ Connected video monitor (page 140) (The
Image LCD is disabled when this is in use)
✔ Remove the CF card from the DCS 645 and
plug it into a laptop computer. View the
images using the included software.