Honeywell CHRONOTHERM T8611G - Manual (Page 12)

69-1414—2 G.H. Rev. 1-03 www.honeywell.com/yourhome
T8611G CHRONOTHERM ® DELUXE ZONING HEAT PUMP THERMOSTAT
Printed in U.S.A. on recycled
paper containing at least 10%
post-consumer paper fibers.
Automation and Control Solutions
Honeywell International Inc. Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MN 55422 Scarborough, Ontario
M1V 4Z9
Table 8. T8611G2051 Sequence of Operation.
Table 9. Occupied Terminal Operation.
Fan
Selection System Selection Call Energize Display****
AUTO OFF None None None
AUTO OFF Fan G Fan Symbol
ON OFF None G Fan Symbol
AUTO COOL None O* None
AUTO COOL or AUTO Cooling O, G, Y Snowflake Symbol,
Fan Symbol
AUTO HEAT or AUTO None B* None
AUTO HEAT or AUTO Stage 1 Heating B, Y Flame Symbol,
Fan Symbol
AUTO HEAT or AUTO Stage 2 Heating B, Y, W2 Flame Symbol,
Fan Symbol,
AUX. HEAT
AUTO EM. HEAT None L EM. HEAT
AUTO EM. HEAT Stage 1 Heating L, E Flame Symbol,
Fan Symbol,
EM. HEAT
AUTO EM. HEAT Stage 2 Heating L, E, W2 Flame Symbol,
Fan Symbol,
EM. HEAT,
AUX. HEAT
AUTO AUTO None O**, B*** None
SYSTEM and FAN selection identified on the LCD.
* = Thermostat O/B terminal is configurable for heating or cooling changover.
** = O is energized when cooling was last call from thermostat.
*** = B is energized when heating was last call from thermostat.
**** = Installer setup mode 36 disables flame and snowflake icons from display.
Mode OC Contacts Closed Display
Wake No None
Leave Yes None
Return No None
Sleep Yes None