Hasselblad Flextight 646 - Manual (Page 14)

Attaching/Detaching the Feed Table
To attach the feed table correctly onto the scanner lead the brackets (B)
as far as they go into the slits (C) in the scanner base, then lower the table
and pull it slightly backwards to ensure that the notches (D) catch the
bottom of the slits.
To detach the feed table correctly from the scanner lift it slightly
upwards to release the notches (D) from the bottom of the slits (C) then
pull it away from the scanner.
User's Guide - Flextight 646
Hardware Reference - Flextight 646
14
Setting up the Scanner
English
C
B
D
D
A
Figure 4: Attaching/Detaching the Feed Table