Cleaning the external surface of the scanner 27, Disposal 27, Cleaning the external surface of the scanner – Hasselblad Flextight 646 User Manual
Page 27: Disposal, English
9. Connect the plug (C).
10. IMPORTANT: The "T" on the lamp board cover (E) indicates the
socket for the transparencies tube.
11. Mount the cabinet (B) and the feed table (A) following the reverse of
the procedure used when removing them.
NOTE!
When mounting the cabinet (B) make sure that it goes free of
all cables and extrusions.
12. Turn on the scanner and check function of the new tube.
Cleaning the External Surface of the Scanner
If the external surface of the scanner becomes dirty, then clean it with a
damp cloth. Be careful not to get any moisture inside the scanner or on
any of the connectors. Do not use alcohol or other solvents.
Disposal
If you need to dispose of the scanner, it must be delivered to an
authorized waste plant for electronics equipment.
User's Guide - Flextight 646
Hardware Reference - Flextight 646
27
Cleaning the External Surface of the Scanner
English