HP Photosmart D5400 series User Manual
Page 181
Advertising
5.
Lift the latch handle on the print carriage until it stops.
6.
Remove the print head by lifting it up.
7.
Clean the print head.
There are three areas of the print head that need to be cleaned; the nozzle
area,the edge between the nozzles and contacts, and the electrical contact area.
1 Nozzles
2 Edge between nozzles and contacts
3 Electrical contacts
CAUTION:
Touch the nozzle and the electrical contact areas only with
swabs and not with your finger.
Chapter 11
180
Troubleshooting
T
roub
les
hoot
ing
Advertising
This manual is related to the following products: