Fixing installation plate(standard type), Service manual 17 installation – Heat Controller DMH24DB-1 User Manual

Page 17

Advertising
background image

Service Manual 17

Installation

The wall you select should be strong and solid enough to
prevent vibration

1. Mount the installation plate on the wall with

type "A" screws. If mounting the unit on a concrete wall,
use anchor bolts.

• Mount the installation plate horizontally by aligning the

centerline using a level.

2. Measure the wall and mark the centerline. It is also

important to use caution concerning the location of the
installation plate-routing of the wiring to power outlets is
through the walls typically. Drilling the hole through the
wall for piping connections must be done safely.

Fixing Installation Plate(Standard Type)

Installation Plate

Type "A" screw

Chassis

Hook

Installation plate

Left rear piping

Right rear piping

Ø70mm

Ø70mm

D

B

A

C

A

B

C

D

SE

65

110

85

110

CHASSIS

(Grade)

Distance (mm)

Advertising