Heat Controller DMH24DB-1 - Manual (Page 28)

28 Multi type Air Conditioner
Connect the cable to the indoor unit
CAUTION: Provide a circuit breaker between power source and the unit as shown
below.
Air
Conditioner Circuit Breaker
Use a circuit
breaker or time
delay fuse.
Main power source
Model
24k 1Ø, 230/208V
Per max. fuse size
on unit name plate
Power source Fuse or breaker
Capacity
1. Connect the wires to the terminals on the control board
individually according to the outdoor unit connection.
• Ensure that the color of the wires of outdoor unit and the
terminal No. are the same as those of indoor unit respec-
tively.
2. Attach the Grille onto the cabinet.
• Grasp the lower left and right side of the Grille and
engage four tabs on the top inside edge of the chassis.
• Press the Grille toward the chassis until it will be back into
place.
Connecting cable
Connecting the Cable between Indoor Unit and Outdoor Unit