HP PL4260N - Manual (Page 41)

Changing the
TV Settings
Changing the TV Settings 31
Using the Time Menu
The Time menu sets the date and time, sleep timer, and
other time options.
You choose the initial Date and Time for the TV during
the Setup Wizard, or in this menu by choosing
Manual mode.
Time Zone selects the time zone such as Central
Standard Time (CST) or Pacific Standard Time (PST).
Auto Turn-On and Auto Turn-Off are individual,
independent settings to automatically turn on or turn off
the TV.
Sleep Timer sets the minutes and seconds before the TV
turns off. You can also set the sleep timer using the
remote control Sleep button.
Using the Channel Menu
If you skipped the Setup Wizard or if the initial setup
does not find all the channels, use this menu to
automatically or manually scan and find the channels.
The scan continues until the channel is found or
confirmed as no signal.
Use this menu to edit the program channel list to lock
or unlock an entire channel (for parental control) or to
skip a channel when using the Channel adjust buttons.
Use this menu to view program number and name
information, and to edit the display name of analog
channels.
Time menu Options
Time Zone AST/EST/CST/MST/PST/
AKST/HST/NST
Date/Time ■ Mode: Manual/Auto
■ Date/Time
Auto Turn-On ■ Mode: Off/Once/Daily
■ Time
Auto Turn-Off ■ Mode: Off/Once/Daily
■ Time
Sleep Timer ■ Mode: Off/On
■ Time
Daylight Savings On/Off
n
Auto Scan or Manual Scan scans for all
channels. For example, a manual scan for
channel 14 would find all available
channels, such as channel 14 and sub
channels 14-2 and 14-7.
Channel menu Options
Auto Scan ■ Scan: Antenna/Cable
■ OK (button)
■ Cancel (button)
Manual Scan ■ Channel No (number)
■ Frequency
■ OK (button)
Edit Program ■ Music
■ CH. No. (Channel
number)
■ Name
■ Lock
■ Skip
Information Shows program number
and name; the display
name of analog channels
may be edited