Heath Zenith 3035748 (AC-6195) - Manual

© 2007 598-1075-03
This package includes:
• Wireless chime
• Hardware pack
You'll need to buy 3 "D" alkaline batteries for the chime. In typical use,
alkaline batteries will last three years.
2.
Install the 3 al-
kaline "D" bat-
teries. Make
sure batteries
are oriented
properly.
3.
Test Range. Temporarily position chime where you want it mounted. Press
push button to verify chime and push button work properly. If chime does
not sound, see Troubleshooting.
1.
Open chime case:
Press in catch on bot-
tom of chime and lift
the case open.
B
a
tt
e
ry
B
a
tt
e
ry
B
a
tt
e
ry
Chime
Volume
4.
Mount accessory chime.
Chime can be mounted by using 3 holes in the back of case, or by using 2
screws with keyholes.
Chime Back Case
Keyhole Mounting
Chime Back
Case Mounting
Close Chime Case
Snap front of chime case on. Start with top edge of case aligned with the top
of back plate.
Holes
for Wall
Mounting
3-5/16"
(8.4 cm)
Wireless Chime
Accessory Receiver
Model 3035748 (AC-6195)