HP 39g+ - Manual (Page 202)

14-4 Notes and sketches
To draw a box 1. In Sketch view, press 9S6X• and move the cursor to
where you want any corner of the box to be.
2. Press 7PY• . This turns on box-drawing.
3. Move the cursor to mark the opposite corner for the box.
You can adjust the size of the box by moving the cursor.
4. Press PF• to finish the box.
To draw a circle 1. In Sketch view, press 9S6X• and move the cursor to
where you want the center of the circle to be.
2. Press 8DS8G• . This turns on circle drawing.
3. Move the cursor the distance of the radius.
4. Press PF• to draw the circle.
DRAW keys
Key Meaning
9PU• Dot on. Turns pixels on as the cursor
moves.
9PU• Dot off. Turns pixels off as the cursor
moves.
GDI@• Draws a line from the cursor’s starting
position to the cursor’s current position.
Press
PF• when you have finished. You
can draw a line at any angle by moving the
cursor.
7PY• Draws a box from the cursor’s starting
position to the point at which you press
PF• .
8DS8G• Draws a circle with the cursor’s starting
position as the center. The radius is the
distance between the cursor’s starting and
ending position. Press
PF• to draw the
circle.