HP Server Blades BL30p - Manual (Page 32)

ProLiant BL p-Class
Server Blade Enclosure
with enhanced backplane
components Dimensions Height 10.5 in (26.67 cm)
Width 17.60 in (44.70 cm)
Depth 28.86 in (73.30 cm)
Input Specifications Rated input voltage -43 VDC to -53 VDC Nominal -48 VDC
Rated input current 125 A at -48 VDC
Rated input Power 6000 W
Individual Server Blade
Bay Ratings Rated input voltage -43 VDC to -53 VDC Nominal -48 VDC
Rated input current 14.6 A at -48 VDC
Rated input Power 700 W
Temperature Range Operating 50° to 95° F (10° to 35° C)
Non-Operating -22° to 140° F (-30° to 60° C)
Relative Humidity
(non-condensing) Operating 20% to 80%
Non-Operating 5% to 95%
Wet Bulb Temperature Operating 82.4° F (28° C)
Non-Operating 101.7° F (38.7° C)
NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper
operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude
maximum for storage is 70 KPa.
Operating and
Performance
Specifications for ProLiant
BLp-Class RJ-45 Patch
Panel 2 with Fiber Channel
pass through Dimensions Height 10.405 in (26.43 cm)
Width 1.535 in (3.899 cm)
Depth 27.697 in (70.35 cm)
Capability IEEE 802.2, 802.3, 802.3u
Network Transfer Rate 10 Base-T (half-duplex) 10 Mbps
10 Base-T (full-duplex) 20 Mbps
100 Base-TX (half-duplex) 100 Mbps
100 Base-TX (full-duplex) 200 Mbps
1000 Base-TX (full-duplex) 1000 Mbps
Fiber Channel SAN Velio VC1070 re-timer Auto-rate negotiate between 2G and 1G
Connector Network 32 RJ-45 in the back.
Fiber Channel SAN 16 Pluggable SFP optical cages in the front
Cable Support 10 Base-TX Categories 3, 4, or 5 UTP (2 or 4 pair);
up to 328 ft (100 m)
100 Base-TX Category 5 UTP (2 pair); up to 328 ft/100 m
1000 Base-TX Category 5E (4 pair); up to 328 ft (100 m)
Fiber Channel SFP optical cable
EMI FCC Class A
ICES-003 Class A
AS/NZS 3548 Class A
VCCI Class A
NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper
operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude
maximum for storage is 70 KPa.
QuickSpecs
HP ProLiant BL30p Server Blade
Technical Specifications
DA - 11958 North America — Version 6 — September 24, 2004 Page 32