HP Server Blades BL30p - Manual (Page 35)

Operating and
Performance
Specifications for ProLiant
BL p-Class GbE2
Interconnect Switch Dimensions Height 10.405 in (26.43 cm)
Width 1.535 in (3.899 cm)
Depth 27.697 in (70.35 cm)
Weight 12.0 lb/5.4 kg per interconnect switch
Performance 24 Gbps External port bandwidth per server blade enclosure (full duplex)
Forwarding rate 1.5 million pps per gigabit port (64-byte packets)
Auto-MDI/MDIX, auto-negotiation and auto-sensing with full-duplex support
Forwarding Mode Store and forward
MAC Addresses 2,048 per interconnect switch
Forwarding Table
Age Time Maximum age: 1 to 65535 seconds; default: 300 seconds
Memory 128MB Main, 32MB flash and 2MB packet buffer per interconnect switch
Compliance IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3z (F-GbE2 only), 802.1D, 802.3ac, 802.3ad
(Static), and 802.1Q
SNMP v1 (RFC 1157), MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface Group MIB
(RFC 2863), Ethernet MIB (RFC 1643), 802.1Q Extended Bridge MIB , Entity MIB (RFC
2037), RADIUS Authentication MIB, 802.3-2002 MIB, SNMP Trap Convention (RFC
1215), Bridge Trap (RFC 1493), Remote Monitoring Traps (RFC 1757) and HP
Enterprise Switch MIBs and Environmental Traps
RADIUS (RFC 2138), Telnet (RFC 854), TFTP client (RFC 783), SSH v1.5, SCP v1.5,
NTP v2 (RFC 1119), BootP client (RFC 2132), and XModem
Network Transfer
Rate 10 Base-T (half-duplex) 10 Mbps
10 Base-T (full-duplex) 20 Mbps
100 Base-TX (half-duplex) 100 Mbps
100 Base-TX (full-duplex) 200 Mbps
1000 Base-TX (half-duplex) 1000 Mbps
1000 Base-TX (full-duplex) 2000 Mbps
1000 Base-SX (full-duplex) 2000 Mbps
Connector 12 RJ-45, 2 DB-9 (C-GbE2 Interconnect Kit)
8 LC fiber, 4 RJ-45, 2 DB-9 (F-GbE2 Interconnect Kit)
EMI FCC Class A
ICES-003 Class A
AS/NZS 3548 Class A
VCCI Class A
Safety UL/CUL Listed Accessory
CE
Power
Requirements 48VDC: 2040 mA, 98 W maximum (per interconnect switch without GbE2 Storage
Connectivity Kit)
48VDC: 2355 mA, 113 W maximum (per interconnect switch with GbE2 Storage
Connectivity Kit)
Temperature
Range Operating 50° to 95° F (10° to 35° C)
Non-operating -22° to 140° F (-30° to 60° C)
Relative Humidity
(non-condensing) Operating 20% to 80%
Non-operating 5% to 95%
Wet Bulb
Temperature Operating 82.4° F (28° C)
Non-operating 101.7° F (38.7° C)
NOTE: Operating temperature has an altitude derating of 34° F/1° C per 1,000 ft/304.8 m. No direct sunlight. Upper
operating limit is 10,000 ft/3,048 m or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft/9,144 m or 30.3 KPa/4.4
psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F/45° C. Altitude maximum for
storage is 70 KPa.
QuickSpecs
HP ProLiant BL30p Server Blade
Technical Specifications
DA - 11958 North America — Version 6 — September 24, 2004 Page 35